|
|
|
||
|
FM Audio Transmitter
Article number: CATR101BK
|
|||
|
|
|||
|
|
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch, The Netherlands 06/19
|
||
Preface
Thank you for purchasing the Nedis CATR101BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The FM Audio Transmitter is a multifunctional FM streaming device for your car and allows you to:
Stream music to your FM radio from a Bluetooth device or a MicroSD card.
Safely answer phone calls while driving.
Charge your mobile devices.
The product is equipped with a Bass Booster function that delivers a deeper bass at the touch of a button.
Intended use
The product is exclusively intended for use in a vehicle with an auxiliary power outlet.
The product is exclusively intended for streaming audio to a car's FM radio, answering mobile phone calls via Bluetooth and charging devices via USB.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
|
Product
|
FM Audio Transmitter
|
|
Article number
|
CATR101BK
|
|
Input voltage
|
12 - 24 V
|
|
Charger output 2.4
|
5 V / 2.4 A
|
|
Charger output 3.0
|
3.6-6 V / 3.0 A
6-9 V / 2.0 A
9-12 V / 1.5 A
|
|
Wireless technology
|
FM
Bluetooth® 5.0
|
|
FM frequency range
|
87.6 - 107.9 MHz
|
|
Max. radio transmit power
|
4 dBm
|
|
Bluetooth frequency range
|
2400 - 2483.5 MHz
|
|
Bluetooth profile
|
A2DP
HFP
|
|
Max. supported MicroSD card capacity
|
32 GB
|
|
Music format
|
MP3
WMA
FLAC
|
|
Display
|
2" LED
|
|
AUX port
|
3.5 mm
|
|
Bass Booster
|
Yes
|
|
Voice assistant
|
Yes
|
|
Hands-free calling
|
Yes
|
Parts list
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety instructions
WARNING
Only use the product as described in this manual.
Be careful when using the product while driving. Always focus your attention on the road.
Do not expose the product to direct sunlight, naked flames or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Installation
To prepare the product for wireless use:
1.
Plug the product in an auxiliary power outlet.
If the car battery voltage is lower than V, the display will flash. The product can still work well, but the car may have trouble starting the engine at a voltage lower than V. The product will not function at a voltage lower than V.
2.
Tune your car radio to an unused FM frequency.
3.
Use the frequency buttons (7 & 9 ) to tune the product to the same frequency as your car radio.
To prepare the product for wired use:
1.
Plug the product in an auxiliary power outlet.
2.
Plug the provided audio cable into the product's AUX port (6 ).
3.
Plug the other end of the cable into the AUX port of the radio.
To connect your mobile phone to the product:
1.
Activate Bluetooth on your phone and connect with the product (CATR101BK).
2.
If asked, enter the pairing code '0000'.
Use
Play music
To stream music from the product to the FM radio, choose one of the following options:
Insert a Micro SD card (1 ). The music on the card will play automatically.
Play music directly from the mobile device that is connected to the product via Bluetooth.
Press and hold 4 for 2 seconds to switch between SD card mode and Bluetooth mode.
To control music that is playing:
Press 8 to play or pause the music
Press 3 and 5 to switch between songs.
Press 4 to activate the Bass Booster.
Answer phone calls
When a call comes in while playing music, the product will automatically switch to telephone mode.
To answer an incoming call, press 8 .
To reject an incoming call, press and hold 8 for 2 seconds.
During a call, press and hold 8 for 3 seconds to switch to private mode.
To call the previous number, press 8 twice.
When making a call, you must dial the number on your phone. Once the call connects, you can use the product's hands-free function.
Press and hold 8 for 2 to 3 seconds to activate the voice assistant on your mobile phone (Siri or Google Assistant).
Charge a mobile device
To charge your device:
1.
Plug the product in an auxiliary power outlet.
2.
Connect your device to q or e . Use an USB cable.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
|
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product CATR101BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/CATR101BK#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands