|
|
|
||
|
LED Night Light
Article number: LNLW10WT
|
|||
|
|
|||
|
|
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch, The Netherlands 01/23
|
||
Preface
Thank you for purchasing the Nedis LNLW10WT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is a nightlight with motion sensor that is directly plugged into the power socket.
This product is intended to illuminate a dark environment when movement is detected
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.
This product can be used by children aged from 6 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Specifications
|
Product
|
LED Night Light
|
|
Article number
|
LNLW10WT
|
|
Dimensions (l × w × h)
|
81 × 44 × 60 mm
|
|
Weight
|
40 g
|
|
Power input
|
220 - 240 VAC ; 50 Hz
|
|
Power consumption
|
0.6 W
|
|
IP rating
|
IP20
|
|
Brightness
|
5 - 7 ml
|
|
Sensor delay time
|
25 ± 5 s
|
|
Sensor angle
|
90 °
|
Main parts (image A)
|
|
A
Safety instructions
WARNING
Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not open the product, there are no user serviceable parts inside.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
Do not expose the product to water or moisture.
The LED lamp cannot be replaced.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not cover the product when in use.
Installation
Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Installing the product (im age B)
|
|
B
Install the product as shown in image B.
Use
Using the product
The product is active when plugged into a power source.
The LED A2 automatically switches on when the PIR sensor A3 is activated by movement in a dark environment.
After 25 seconds of no movement detection, the LED switches off.
Maintenance
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not clean the inside of the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
|