|
|
|
||
|
|
|||
|
Smart Wi-Fi LED Wall Light
Article number: WIFILW06RGB
|
|||
|
|
|||
|
|
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch, The Netherlands
|
||
About this document
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Keep the packaging for future reference.
Symbols used
|
WARNING!
|
Signal word used to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury.
|
|
CAUTION!
|
Signal word used to indicate a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.
|
|
NOTICE
|
Signal word used to address practices not related to physical injury.
|
|
|
Indication to explain the product is suitable for indoor use only.
|
Product description
Product overview
|
|
Safety
Intended use
This product is intended as a wall light to illuminate your room with white or colour ambiance light. The wall light can be styled in different ways and can consist of up to 6 lightbars.
This product is intended to be used with the Nedis SmartLife app or with the included remote control.
This product is intended for indoor use only.
Only use the product as described in this user manual.
Safety instructions
WARNING!
Electrical hazard:
Do not open the product. The product may only be opened by an authorised technician for maintenance.
Do not immerse the product in water or other liquids.
Do not expose the product to water, rain, moisture or high humidity.
Disconnect the product from the power source before cleaning.
Fire hazard:
Do not use the product if a part is damaged or defective. Always replace a damaged or defective product immediately.
Only use the power adapter provided with this product.
Choking hazard:
Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
Do not let the power cable hang loose. Always fix the power cable to the wall if the power cable is within arm’s reach.
Battery usage by children should be supervised.
Chemical burns hazard:
Always keep button cell batteries, both full and empty, out of reach of children to avoid the chance of swallowing. Dispose of used batteries immediately and safely. Keep in mind that the first symptoms may look like child diseases like coughing or drooling. Seek immediate medical attention when you suspect that batteries have been swallowed.
Do not subject cells or batteries to mechanical shock.
CAUTION!
Bright light hazard:
Do not disassemble or try to repair the product. The LED light in this product is not replaceable. Avoid direct eye exposure to the LED light diodes.
NOTICE
Risk of damaging the product:
Do not use aggressive chemical cleaning agents when cleaning the product.
Do not clean the inside of the product.
Do not clean the couplers and connectors with water or other liquids.
Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
Observe the plus (+) and minus (–) marks on the cell or battery and product and ensure correct use.
Do not use any cell or battery that is not designed for use with the product. Use only the cell or battery in the product as stated in the manual.
Do not drop the product and avoid bumping.
Risk of hazardous waste:
Properly dispose empty cells or batteries.
Installation
Assembling the product
|
|
|
|
|
|
|
|
|
|
Mounting the product
|
|
Connecting the product to the Nedis SmartLife app
|
|
|
Use
Controller
|
|
Short press:
|
|
Switch the product on.
|
|
|
Switch between 44 light modes.
|
|
|
Double press:
|
|
|
Switch the product off.
|
|
|
Press and hold for 5 seconds:
|
|
|
Reset the product.
|
|
|
|
Short press:
|
|
Activate a music mode.
|
|
|
Switch between 9 music modes.
|
|
|
|
Short press:
|
|
Adjust the brightness.
|
Remote control
|
|
Switch the product on/off.
|
|
|
Start/pause the lights.
|
|
|
Activate a music mode.
|
|
|
Switch between light modes.
|
|
|
Change the light transition speed.
|
|
|
Change the light mode randomly.
|
|
|
Change the light brightness.
|
|
|
Change the colour.
|
|
|
Change the light colour to white, red, green, or blue.
|
Reconfiguring the product
1.
Unplug the power adapter from the power outlet.
2.
Carefully pull the product from the wall.
3.
Remove the double sided tape from the back of the product.
4.
Remove the connectors from the back of the product.
5.
Reconfigure the light bars following the installation steps.
6.
Place the cover plates on all unused couplers.
7.
Mount the product to a wall with double sided tape.
If the included double sided tape runs out, use suitable double sided tape for the desired surface.
8.
Plug the power adapter into a power outlet.
Maintenance
WARNING!
Electrical hazard:
Do not open the product. The product may only be opened by an authorised technician for maintenance.
Do not immerse the product in water or other liquids.
Clean the housing with a soft, damp cloth every month.
Clean the outside of the product every month with a soft, damp cloth. Avoid abrasives that can damage the surface.
Changing the battery of the remote control
1.
Open the battery compartment.
2.
Remove the old battery.
3.
Place a new type CR2032 battery.
4.
Close the battery compartment.
Troubleshooting
|
Problem
|
Possible cause
|
Possible solution
|
|
The product does not connect to the Nedis SmartLife app.
|
The product is not connected to a power source.
|
Check if all cables are properly plugged in.
|
|
Your mobile device is not connected to Wi-Fi.
|
Connect your mobile device to Wi-Fi.
|
|
|
The router is set to 5 GHz Wi-Fi.
|
Set the router to 2.4 GHz Wi-Fi.
|
For persistent malfunctions, please contact your supplier or Nedis customer service.
Warranty
Any changes and/or modifications to the product will invalidate the warranty. We accept no liability for damage caused by improper use of the product.
This product is intended for private use only (normal domestic use). Nedis is not liable for wear and tear, defects and/or damage caused by commercial use of the product.
Disclaimer
Nedis retains the right to change the design, specification and performance criteria of the product without notice or obligation.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WIFILW06RGB from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: